open access

Chip Centrifuge Automation on Crown Gear Line

  • H. Bahuruteen Ali Ahamadu Assistant Professor, Department of Mechanical Engineering, Velammal Institute of Technology, Chennai-601204.
  • M. Sudarsan Department of Mechanical Engineering, Velammal Institute of Technology, Chennai -601204.
  • V Vijayagoutham Department of Mechanical Engineering, Velammal Institute of Technology, Chennai -601204.
  • M Karthik Raj Department of Mechanical Engineering, Velammal Institute of Technology, Chennai -601204.
  • D Rajesh Kumar Department of Mechanical Engineering, Velammal Institute of Technology, Chennai -601204.

Abstract

The ultimate need for automation has been tremendously increasing in our day to day life to complete our difficult tasks with ease. Moreover automation has entered in industries a century ago. It helped several industries in satisfying the need of people and helped in developing their nations. Nowadays some industries are completely automated to meet the growing demand. And now automation of simple works may also save a lot while calculating it in a large scale. So, we have planned to automate the separation of lubricant from the chip produced during the machining of crown gears. Since the chips containing lubricants are collected in a separate container and then processed then again the lubricant are restored and the chips are dumped. This leads to wastage of time and a separate labor is required to do this process. To overcome this we have designed a model that automatically separates the lubricant and restores it to the machine and dumps the waste.

Downloads

Download data is not yet available.