open access

Automatic Waste Collecting Sysytem at Public Transport

  • Barathkumaar R Assistant Professor, Department of Mechanical Engineering, K. S. R. College of Engineering, Tiruchengode-637215
  • Naveen N UG Students Department of Mechanical Engineering, K. S. R. College of Engineering, Tiruchengode-637215
  • Naveen M UG Students Department of Mechanical Engineering, K. S. R. College of Engineering, Tiruchengode-637215
  • Nanthakumar S UG Students Department of Mechanical Engineering, K. S. R. College of Engineering, Tiruchengode-637215
  • Qudubuddeen M.Y UG Students Department of Mechanical Engineering, K. S. R. College of Engineering, Tiruchengode-637215

Abstract

Now a days, the plastic waste management is the most challenging one for the government. The plastic or polyethylene and plastic paper waste thrown out while travelling in bus or other large public transport vehicle is deposited on the road side and hill station sometimes it may block the drainage system and pollute the land .By implementing the waste collecting system inside buses which reduce such kind of problems. The flat belt conveyer which is operated by means of solar powered electric motor is placed just nearer to the side doors of either side of the bus to collect that kind of wastes and stored in the waste storage tank which is fitted in the bus in particular interval of time. This system is designed to use on all vehicles but this is highly efficient on the vehicles which drove over long distance (more than 100 kms), because the passengers who travels more produces more wastes.times the value of KDP.  Theoretical HOMO LUMO studies were also done for the crystal.

Downloads

Download data is not yet available.